Solar energy

Introduction

The world energy consumption is growing rapidly, and experts estimated that we will need ~30 terawatts (TW) in 2050 (46 TW in 2100), which is almost double the current energy requirement (~16 TW). However, fossil fuels are limited in supply to support such a high energy demand continuously, and their combustion produce large amount of carbon dioxide (CO2), which causes serious environmental effect (e.g., global warming).  Hydrogen recently received much attention as a form of storing energy (i.e., fuel), as it is potentially clean (no CO2 release when used in a fuel cell) and has a very high specific energy density (142 MJ/kg). Ironically, due to economical reason, hydrogen is now mostly produced by steam reforming method, which consumes fossil fuels and releases CO2. Thus, for the premise of hydrogen being clean and sustainable to hold, renewable energy source, such as solar energy (~ 89 PW); which exceeds the world energy consumption by more than 5,000 times,  needs to be utilized in the production of hydrogen.  To this end, our group will work on solar water splitting for hydrogen production using photocatalystWe will also focus on solar CO2 conversion into valuable fuels like CH4 and CH3OH and so on with it.

For the solar water splitting with photocatalyst, it requires energy of 1.6~2.4 eV considering kinetic overpotential of both hydrogen and oxygen evolution reactions. And CO2 reduction even requires higher energy than water splitting. Thus semiconductor (photocatalyst) for water splitting and CO2 reduction should have the band gap above 1.6 eV (usually 2.0 eV), which cannot utilize long wavelength of visible light and infrared (IR).  This portion is actually more than 50~90% of solar spectrum. While most of the research groups make efforts to increase the solar-to-fuel conversion efficiency in this restricted solar spectrum, our group will concentrate on to extend the use of solar spectrum with quantum PEC approach.

The first direction for that is applying “Upconversion materials” to convert low-energy photon (IR) to high-energy photon (visible light, UV). By using these materials, we can use IR light which cannot be harvested by any present photocatalysts until now.  The second new research area is “Quantum wells PEC”.  In this lattice well-matched quantum well structure, it can extend absorption spectrum maintaining its bulk band gap. That is to say, this system can utilize longer wavelength up to the thresholds of small band gap semiconductor, without changing the photovoltage from wide band gap semiconductor, which is critical for water splitting.  Our group will also work on to improve the performance of photocatalyst itself in both direction of increasing the effiency of metal oxide photoelectrodes and stabilizing the solar cell materials already posessing high efficiency.

My long-term research goal is to commercialize the solar water splitting system as well as solar fuel production system by improving both efficiency and stability of photocatalyst in addition to application system deveolopment.  

 

This will be also the ultimate research direction of JW Energy Lab. at UNIST.

Prof. Ji-Wook Jang

Interests

PEC system development

 

Solar water splitting

 

Solar fuels

Nitrate to  NH3

O2 to  H2O2

Organic oxidation

 

PEC redox flow battery

 

Designing efficient photoelectrode